How To Your Laptop Cool
Laptop users are no strangers to their portable Laptop overheating when used continuously for a long time, luckily, the Internet is brimming with laptop overheating fixes.
Let’s check out a few laptop overheating fix that really works:
Laptop Overheating Solution -1
Users must avoid putting their laptops on anything including a cushion when switched on. Apparently, the soft material could slow down the airflow vents, particularly the rear vents, leading to the laptop getting overheated.
Laptop Overheating Solution -2
It is also advised to avoid putting anything over the keyboard when the laptop is in the closed-lid mode as this could lead to the gadget turning on and off frequently. This not only produces a lot of heat but also drains the gadget’s battery, according to HowStuffWorks.
Laptop Overheating Solution -3
Ensure your laptop is switched off overnight to allow it to cool off. Those who use the gadget during the day must set it to go into standby mode when unengaged in order to curb heat output from the laptop’s components and save power at the same time.
Laptop Overheating Solution -4
Users must never leave their laptops switched on when it is in a bag.
Laptop Overheating Solution -5
It’s important to keep the air vents clean as that is where dust usually collect. This restricts the vents from working smoothly, according to a report from CNet.
Alternatively, users can use a small electric cleaner to take care of the dust accumulated on the vents.
Laptop Overheating Solution -6
The most important thing you need to do when your laptop is overheating, is to clean the fan/s that provide/s cooling to the CPU and graphics card. Over time they build up layers of dust and dirt that slow them down and block flow of air. Consult your laptop’s manual or manufacturer to find out how you can open the laptop to access and clean these parts.
Before you attempt to do any cleaning, however, follow these steps:
- shut down the computer.
- remove the battery.
- unplug the power strip.
- ground yourself
Carefully clean the fan/s with a cotton swab dipped in a drop of alcohol. Make sure the alcohol has completely evaporated before you reconnect the laptop to the power. You can also use a vacuum cleaner to remove the dust and dirt that clocks up the fan/s. To prevent damage to the fan, do not let it revolve in the wrong direction. If you want to use canned air to clean the fan, arrest the fan by holding it down.
Next, you can clean the exhaust port by sucking out air with a vacuum cleaner. The exhaust port usually sits on the side of the laptop. It’s the opening that blows out hot air.
The intake grills are small openings that allow air to be sucked into the laptop by the revolving fans. They can sit on the sides or at the bottom of your notebook. To clear the intake grills, spray them with canned air.
Finally, you can apply fresh thermal grease to the interface between the CPU and its heat sink. Again, please consult the laptop’s manual or manufacturer to obtain instructions on how to disassemble these components.
More from my site